MOT Status
ExpiredMileage
128,841 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced do not paint or underseal (6.1.1 (c) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front LOWER ARM PIN BUSH SLIGHTLY WORN
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Indicator switch faulty (4.4.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre is starting to wear on edges
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre is starting to wear on edges
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Tyre is starting to wear on edges
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre is starting to wear on edges
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases Back box (6.1.2 (a))
Corrosion to under body
Difficult to engage gears
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Nearside Washer jet requires adjusting
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Rear Exhaust emissions likely to be affected by an exhaust leak Silencer (8.2.1.1 (b))
Rear Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))
Corrosion to under body
Difficult to engage gears
Items removed from driver's view prior to test
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Nearside Washer jet requires adjusting
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Perished (5.3.4 (a) (i))
Vehicles internal headlight adjuster altered to recheck lights
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing Also wearing on inner edge (5.2.3 (d) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Front Tyre has a tear, caused by separation or partial failure of its structure Both worn excessively on edges (5.2.3 (d) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing Also wearing on inner edge (5.2.3 (d) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Brake pad(s) wearing thin fronts (3.5.1g)
Oil leak
corrosion forming front subframe area
corrosion forming rear of vehicle near rear axle mounting area
Emissions not tested due to exhaust blow (7.3.A.1)
Exhaust has a major leak of exhaust gases at flange between rear silencer and centre pipe area (7.1.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Brake pad(s) wearing thin fronts (3.5.1g)
Oil leak
corrosion forming front subframe area
corrosion forming rear of vehicle near rear axle mounting area
front brake pads wearing thin
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear wheel bearing rough when rotated (2.6.1)
Seat belt anchorage prescribed area is excessively corroded offside outer sill area (5.2.6)
front brake pads wearing thin
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
key operation
wiper noisey
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Stop lamp not working (1.2.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
key operation
wiper noisey
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front brake discs worn.
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YE06 DWG is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying YE06 DWG, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YE06 DWG?
You can check the full history of YE06 DWG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YE06 DWG registered?
YE06 DWG is a 2006 Toyota Aygo, first registered on 9 May 2006.
Is YE06 DWG safe to buy?
The MOT history for YE06 DWG shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YE06 DWG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YE06 DWG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.