2007 Mercedes-benz Vito

Brake disc worn, pitted or scored, but not seriously weakened both sides front and rear (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Play in steering rack inner joint(s) ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides near springs and shock absorbers (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides near springs and shock absorbers (5.3.6 (a) (i))

Nearside Front Steering linkage ball joint has slight play steering arm (2.1.3 (b) (i))

Rear Coil spring corroded both sides corroded (5.3.1 (b) (i))

Steering system slightly rough (2.1.1 (a))

under vehicle general corrosion all over

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed near jacking point (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed near jacking point (6.1.1 (c) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed near jacking point (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed near jacking point (6.1.1 (c) (i))

Nearside Front Steering linkage ball joint has slight play steering arm (2.1.3 (b) (i))

Rear Coil spring corroded both sides corroded (5.3.1 (b) (i))

Steering system slightly rough (2.1.1 (a))

under vehicle general corrosion all over

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front brake discs inner surface slight pitting scoring peripheral rust bands but not seriously weakened

Some components obscured by plastic under body cover panels

Very slight movement front stabilizer links

Rear brake discs slight pitting/ scoring inner surfaces , but not seriously weakened

Some components obscured by plastic under body covers

Slight play front stabilizer link joints ADVISE replacement in pairs

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Track rod end ball pin shank loose (2.2.B.1c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

bonnet release catch broken

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front coil spring broken (2.4.C.1a) DANGEROUS

bonnet release catch broken

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake lever has little reserve travel (3.1.6b)

Brake pipe slightly corroded (3.6.B.2c)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Brake pipe excessively corroded (3.6.B.2c)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)