2008 Honda Cr-v

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear All direction indicators incorrect colour (4.4.3 (a))

Nearside Front Nail in tyre ()

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive Looks like rear main (8.4.1 (a) (i))

Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened lower arm front mounting (5.3.3 (b) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened lower arm front mounting (5.3.3 (b) (i))

Nearside Front Lower Suspension component pin or bush slightly worn rear inner bush (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Macpherson strut corroded but not seriously weakened spring plate (5.3.3 (b) (i))

Offside Front Inner Suspension component pin or bush slightly worn arm rear bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Macpherson strut corroded but not seriously weakened spring plate (5.3.3 (b) (i))

poss stone behind brake back plate

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear axle front mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear axle front mounting (5.3.6 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has a serious fluid leak Shock absorber (2.7.3)