MOT Status
ValidMileage
123,249 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Centre exhaust mount defective
Front and rear suspension components including subframes are in a state of corrosion, not excessive at the time of test
Rear brake discs are starting to corrode
Vehicle underbody structure is in a state of corrosion, not excessive at the time of test
Front and rear brake discs are starting to corrode
Front and rear suspension components including subframes are in a state of corrosion, not excessive at the time of test
Vehicle underbody structure is in a state of corrosion, not excessive at the time of test
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front and rear brake discs are starting to corrode
Front and rear suspension components including subframes are in a state of corrosion, not excessive at the time of test
Front suspension arms rear bushes are starting to deteriorate
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Vehicle underbody structure is in a state of corrosion, not excessive at the time of test
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake discs corroding
Rear Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))
Rear inner sills, under body and chassis corroding
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))
Rear inner sills, under body and chassis components
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
both sides inner sills are slightly corroded
front subframe and lower arms are slightly corroded
most of rear suspension is slightly corroded
under tray and sill covers are fitted
front and rear suspension components are showing general signs of surface corrosion
front suspension arms, rear bushes are starting to deteriorate
nearside rear outer brake pad is about 2/3 worn
vehicle underbody structure, especially around rear inner lower sills is showing general signs of surface corrosion
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Registration plate lamp not working (1.1.C.1d)
front and rear suspension components are showing general signs of surface corrosion
front suspension arms, rear bushes are starting to deteriorate
nearside rear brake hose upper end is starting to corrode
nearside rear outer brake pad is about 2/3 worn
vehicle underbody structure, especially around rear inner lower sills is showing general signs of surface corrosion
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
offside rear tyre worn on the inner edge
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
offside rear tyre worn on the inner edge
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YE08 KTG is a 2008 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YE08 KTG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YE08 KTG?
You can check the full history of YE08 KTG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YE08 KTG registered?
YE08 KTG is a 2008 Mazda 3, first registered on 27 May 2008.
Is YE08 KTG safe to buy?
The MOT history for YE08 KTG shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YE08 KTG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YE08 KTG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.