2008 Mercedes-benz Vito

Coolant leak

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All tyres are perished (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Horn not working (7.7 (a))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / jacking point area hole (6.1.1 (c) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area at the front mounting point of the side step. Side step mounting bracket is also loose (6.1.1 (c) (i))

Offside Front Tyre fouling a part of the vehicle Wheel arch liner is not secure (5.2.3 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Coolant leak

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All tyres are perished (5.2.3 (d) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Central Rear Child Seat fitted not allowing full inspection of adult belt

Exhaust mounting defective Front & rear (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Side steps mounting brackets heavily corroded. Nearside & offside

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Horn not working (7.7 (a))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill & jacking point area (6.1.1 (c) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pedal wearing smooth (1.1.2 (c))

Central Rear Child Seat fitted not allowing full inspection of adult belt

Exhaust mounting defective Front & rear (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Side steps mounting brackets heavily corroded. Nearside & offside

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Tyre tread depth below requirements of 1.6mm both rear (5.2.3 (e)) DANGEROUS

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

offside front wheel bearing not checked

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Central Exhaust system not adequately supported (7.1.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Brake pipe slightly corroded both fronts (3.6.B.2c)

Steering system slightly rough (2.2.D.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Steering system slightly rough (2.2.D.1)