2010 Mazda 3

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Shock absorbers missing (5.3.2 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test ()

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Inner sill and floor corroded

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Inner sill and floor corroded

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear exhaust heatshield loose

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all rear suspension components corroded

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust diesel particulate filter shows evidence of tampering. (8.2.2.1 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))