2001 Audi A4

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Various locations (6.1.1 (c) (i))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Various locations (6.1.1 (c) (i))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced Various locations. (6.1.1 (c) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Anti-roll bar linkage has slight play in a pin/bush Offside and Nearside (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm has slight play in a pin/bush rear (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush rear (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

engine management lamp illuminated

rear brake pad linings low

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Rear registration plate deteriorated (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Registration plate lamp not working (1.1.5c)

Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)