2001 Isuzu Trooper

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated new boot fitted of stick together type, slight seepage from join (6.1.7 (g) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal inner sill area (5.3.6 (a) (i))

Nearside Rear Upper Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension component mounting repair covered in underseal inner sill area (5.3.6 (a) (i))

Offside Rear Upper Coil spring corroded (5.3.1 (b) (i))

Offside Rear bump stop breaking away from backing plate

Oil leak, but not excessive doesnt quite meet fail criteria (8.4.1 (a) (i))

Steering column top bearing slightly worn (2.2.2 (b))

exhaust has had a bandage repair carried out (not leaking at time of test)

Exhaust has a major leak of exhaust gases center silencer outlet pipe almost broken off (6.1.2 (a))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill area (not fully welded) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill area (not fully welded) (5.3.6 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated new boot fitted of stick together type, slight seepage from join (6.1.7 (g) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Upper Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Upper Coil spring corroded (5.3.1 (b) (i))

Offside Rear bump stop breaking away from backing plate

Oil leak, but not excessive doesnt quite meet fail criteria (8.4.1 (a) (i))

Steering column top bearing slightly worn (2.2.2 (b))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front exhaust split and slight blow

Brake pipe excessively corroded both front to back (3.6.B.2c)

Central Rear Upper Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside front brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.C.1b)

Brake pipe slightly corroded both rear outer (3.6.B.2c)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

front exhaust split and slight blow

all rear brake pipes corroded

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front front brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

all rear brake pipes corroded

Nearside Side repeater not working (1.4.A.2c)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside front brake binding (3.7.B.1)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion exhaust

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion exhaust

Front Service brake is causing the vehicle to swerve to the nearside (3.7.C.2)

Nearside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Service brake is causing the vehicle to swerve to the nearside (3.7.C.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

o//s rear tyre wearing on inner edge and will require replacing soon

o/s/f & n/s/f tyres wearing low on inner edges

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)