2003 Toyota Land Cruiser

underseal applied

under sealed

Nearside Front Lower Suspension arm modified but not seriously weakened arm shocker mount welded (5.3.3 (c) (i))

Offside Front Lower Suspension arm modified but not seriously weakened shocker mount welded (5.3.3 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis at outer face (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced over whole underbody chassis and all body mountings (6.1.1 (c) (i))

front engine tray corroded and holed

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at shocker mount (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at outer face (6.1.1 (c) (i))

Nearside Front Lower Suspension arm modified but not seriously weakened arm shocker mount welded (5.3.3 (c) (i))

Offside Front Lower Suspension arm modified but not seriously weakened shocker mount welded (5.3.3 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis at outer face (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced over whole underbody chassis and all body mountings (6.1.1 (c) (i))

front engine tray corroded and holed

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm corroded and seriously weakened shocker mounting (5.3.3 (b) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing (1.1.21 (e) (i))

Offside Front Lower Suspension arm corroded and seriously weakened shocker mounting (5.3.3 (b) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))

Nearside Front inner wing corroded but not in prescribed area

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Body has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.A.1)

fuel tank strap broken.

Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Rear position lamp(s) insecure (1.1.A.3a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear position lamp(s) not working both (1.1.A.3b)

Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Items removed from driver's view prior to test

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front front brake binding (3.7.B.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)