2001 Mazda MX-5

Front suspension heavily corroded

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Stop lamp(s) not working High level (4.3.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front suspension heavily corroded

Handbrake performance low on offside

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside front wheel catching wheel arch trims on lock

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

suspension components front and rear have surface rust

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

suspension components front and rear have surface rust

suspension components front and rear have surface corrosion

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Front corrosion on front and rear suspension arms/components

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top of inner wings and nearside front under bonnet (2.4.A.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg to inner wing by anti roll bar mount/sub frame mount (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg to inner wing by anti roll bar /sub frame mounts (2.4.A.3)

Offside Rear Brake pipe excessively corroded bridge pipe from top of t junction (3.6.B.2c)

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive top of inner wing under bonnet (2.4.A.3)

Vehicles internal headlight adjuster altered to recheck lights ()

corrosion on all front and rear suspension arms /components

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

corrosion on all front and rear suspension arms/components. Genral corrosion on under body/sills.

high level stop lamp inoperative

slight corrosion on brake pipes/hoses.

underside surface corrosion

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear coil spring worn so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Offside Rear coil spring worn so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

underside surface corrosion

Offside Front coil spring fractured (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust engine idle speed too high (7.3.D.1)

Nearside Front Anti-roll bar insecure (2.4.G.1)

Nearside Rear Anti-roll bar insecure (2.4.G.1)

Offside Rear Anti-roll bar insecure (2.4.G.1)