2007 Seat Leon

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (front) (5.3.4 (a) (i))

Anti-roll bar linkage ball joint dust cover severely deteriorated both front (5.3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) both front ()

Anti-roll bar ball joint dust cover severely deteriorated both front (5.3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) both front ()

Tyre slightly damaged/cracking or perishing both front (5.2.3 (d) (ii))

Anti-roll bar linkage ball joint dust cover severely deteriorated both front (5.3.4 (b) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Anti-roll bar linkage ball joint dust cover severely deteriorated both front (5.3.4 (b) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Drive shaft joint constant velocity boot severely deteriorated both front outer (6.1.7 (g) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Drive shaft joint constant velocity boot severely deteriorated both front outer (6.1.7 (g) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pad(s) wearing thin both front & both rear (3.5.1g)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Shock absorber has a light misting of oil both rear (2.7.3)

Tyre worn close to the legal limit both front (4.1.E.1)

brake disc modified but not seriously weakened both front & both rear (3.5.1n)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Oil leak

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Oil leak

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp aim too low (1.8)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both rear tyres 2mm on inner edges//