2007 Toyota Prius

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Outer Subframe mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive n/s and o/s inner sill (5.3.6 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened o/s & n/s (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides inner sills (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened o/s & n/s (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides inner sills (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage insecurely attached drop link nut missing (5.3.3 (a) (i))

Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

coil spring corroded both front (2.4.C.1b)

Engine covers fitted obscuring some components in the engine bay

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear section exhaust holed at bracket.

Under-trays fitted obscuring some underside components

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components