2010 Fiat Panda

Brake lining(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

play in both front strut tops when jacked up

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Axle deformed and unserviceable spring cup mounted to axle corroded and holed (5.1.1 (a)) DANGEROUS

Brake cable damaged but not to excess both handbrake cables outer sheathing split (1.1.15 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

play in both front strut tops when jacked up

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear axle corroded

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 1.6mm on inside edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 1.6mm on inside edge (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge o/s and n/s worn inner edges (5.2.3 (e))

Front brake discs corroding

Exhaust system insecure (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge o/s and n/s worn inner edges (5.2.3 (e))

Front brake discs corroding

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases CENTER SECTION (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

front exhaust mounting corroded

Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front exhaust mounting corroded

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Items removed from driver's view prior to test ()

Exhaust has a minor leak of exhaust gases back box poor (7.1.2)

Under-trays fitted obscuring some underside components

Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Under-trays fitted obscuring some underside components

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)