2012 Ford Mondeo

Nearside Front Headlamp has condensation.

Rear Coil spring corroded Both. (5.3.1 (b) (i))

No rear seats fitted at time of test.

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Headlamp aim projected beam image is obviously incorrect lights need drying out and adjusting (4.1.2 (c))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Undertray likely to become detached resting on coil spring (6.2.1 (a) (ii)) DANGEROUS

Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

under body corroded

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Nail in tyre ()

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Nail in tyre ()

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Wiper blade split

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Wiper blade split

Offside Front Inner cv boot has signs of cv grease around drive shaft

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Headlamp aim too high (1.8)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Offside Front Inner cv boot has signs of cv grease around drive shaft

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components