2003 MG Zt-t

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Nearside Rear Position lamp insecure (4.2.1 (c) (i))

Nearside Rear Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Nearside Rear Position lamp insecure (4.2.1 (c) (i))

Nearside Rear Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake lining(s) wearing thin (3.5.1g)

Offside Front Lower Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake disc excessively pitted (3.5.1h)