2004 Mazda MX-5

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s inner and outer sills corroded (5.3.6 (a) (i))

exhaust slightly corroded

front and rear suspension components corrodd

rear wheel arches slightly corroded

Nearside Rear wheel bearing has excessive play (2.6.2)

Offside Rear Upper Suspension arm corroded and seriously weakened top arm (2.4.G.1) DANGEROUS

underside coated in underseal

Brake fluid warning lamp illuminated (3.6.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Brake pipe excessively corroded front to rear, chalked (3.6.B.2c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Seat belt anchorage prescribed area is excessively corroded nearside front inner sill holed (5.2.6)

Seat belt anchorage prescribed area is excessively corroded offside front chassis leg holed (5.2.6)

Seat belt anchorage prescribed area is excessively corroded offside front inner sill holed (5.2.6)

Service brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded nearside front upper crossmember holed, chalked (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded nearside front wheel arch inside engine bay chalked (2.4.A.3)

rear brake recording little or no effort no brakes working on either rear wheels (3.7.B.5a) DANGEROUS

front subframe corroded but not holed

offside front lower wing holed

Nearside Rear Rear wheel bearing has slight play (2.6.2)

bonnet stay attachment corroded

Offside Front Wheel bolt(s) missing (4.2.A.1e)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

bonnet stay attachment corroded

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch (5.2.6)

Offside Rear brake caliper leaking (3.6.A.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front sill corroded and damaged but not in prescribed area

Offside Front Brake pipe slightly corroded (3.6.B.2c)

bonnet stay attachment corroded

Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)