2008 Toyota Aygo

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front/Middle-Inner/Rear in arch area (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front/Middle-Inner/Rear in arch area (6.1.1 (c) (i))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner/outer/floor (6.1.1 (c) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Rear Brake pipe excessively corroded At flexi union (1.1.11 (c))

Offside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Windscreen washer not working (3.5 (a))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced Sill (6.1.1 (a) (i))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced Sill (6.1.1 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Parking brake lever has little reserve travel (3.1.6b)

Tyre worn close to the legal limit both front (4.1.E.1)

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Number Plate Poor Condition

Offside Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brakes imbalanced across an axle (3.7.B.5b)

front discs corroded