2009 Kia Rio

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

axle corroded

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle 44% (1.2.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

axle corroded

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Brake pipe excessively corroded both (1.1.11 (c))

Rear Brakes imbalanced across an axle 38% (1.2.1 (b) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

spongy brakes

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Brake pipe excessively corroded front to rear from join at front bulkhead to rear flexi hose (1.1.11 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Brake pipe excessively corroded front to rear from join at front bulkhead to rear flexi hose (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge wearing edge and cracking (5.2.3 (e))

Offside Front Nail in tyre ()

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear steel brake pipes coroding (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Nail in tyre ()

Offside Rear Nail in tyre ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front slight roughness when spun

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

rear brake application uneven (3.7.B.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)