MOT Status
ExpiredMileage
157,316 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
rear suspension components slightly corroded
Brake pedal has insufficient reserve travel (1.1.2 (a))
Front Registration plate insecure (0.1 (a))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
rear suspension components slightly corroded
Front Registration plate inscription illegible (0.1 (b))
Front Registration plate insecure (0.1 (a))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brakes imbalanced across an axle 93% (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brakes imbalanced across an axle by more than 50% 94% (1.2.1 (b) (ii)) DANGEROUS
Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Inner Brake pad(s) missing (1.1.13 (c)) DANGEROUS
Offside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Nearside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed 205/55-16 (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Inner CV boot seeping grease
Nearside Front Tyre worn close to the legal limit Worn smooth inner edge (4.1.E.1)
Nearside Front Valve stem slightly damaged Deteriorated (4.1.D.1e)
Nearside Rear Tyre worn close to the legal limit Unevenly worn Perished (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit Unevenly worn Perished (4.1.E.1)
Under tray fitted
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Front Inner CV boot seeping grease
Nearside Front Tyre worn close to the legal limit Worn smooth inner edge (4.1.E.1)
Nearside Front Valve stem slightly damaged Deteriorated (4.1.D.1e)
Nearside Rear Tyre worn close to the legal limit Unevenly worn Perished (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Valve stem slightly damaged Deteriorated (4.1.D.1e)
Offside Rear Tyre worn close to the legal limit Unevenly worn Perished (4.1.E.1)
Under tray fitted
Both rear tyres scrubbed off on inner edge
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Kia Ceed?
Based on 1,665,385 MOT tests across 147,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YG10 UTH is a 2010 Kia Ceed in Grey with a 1,582cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2010 Kia Ceed models, the average MOT pass rate is 72.3% with a typical mileage of 67,447 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Ceed fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,111 recorded failures. If you're considering buying YG10 UTH, it's worth having these areas checked by a mechanic before committing.
The Kia Ceed typically stays on UK roads for around 19 years. At 16 years old, this Kia Ceed is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YG10 UTH?
You can check the full history of YG10 UTH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YG10 UTH registered?
YG10 UTH is a 2010 Kia Ceed, first registered on 23 March 2010.
Is YG10 UTH safe to buy?
The MOT history for YG10 UTH shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YG10 UTH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YG10 UTH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.