2003 Nissan D22

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive chassis generally rusty (5.3.6 (a) (i))

slight bind rear brakes

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive chassis generally rusty (5.3.6 (a) (i))

slight bind rear brakes

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust silencer insecure rear box (8.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive chassis generally rusty (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

slight bind rear brakes

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive general chassis (5.3.6 (a) (i))

slight bind rear brakes

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis rusty (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive chassis all general rust (5.3.6 (a) (i))

Brake performance not tested (1.2.1 (g))

Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis rusty (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive chassis all general rust (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

rear brakes slight bind

Nearside Rear Vehicle structure has slight corrosion chassis (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Front registration plate deteriorated (6.3.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Vehicle structure has slight corrosion chassis (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting chassis (6.6.6)

Nearside steering idler play

Offside Vehicle structure slightly corroded within 30cm of towbar mounting chassis (6.6.6)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Vehicle structure has slight corrosion centre (6.1.B.2)

All position lamps not working (1.1.A.3b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Vehicle structure has slight corrosion centre (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust system not adequately supported (7.1.1)

Rear registration plate deteriorated (6.3.1d)

handbrake support bracket broke

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Brake linkage has restricted free movement (3.5.1k)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake linkage has restricted free movement (3.5.1k)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated (6.3.1d)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)