2005 Peugeot 107

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded within 30cm (7.1.1 (a) (i))

Offside Rear Brake pipe excessively corroded to flexy (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Bumper crash bar corroded

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Bumper crash bar corroded

Front Headlamp aim projected beam image is obviously incorrect both no beam pattern (4.1.2 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed full length (7.1.1 (a) (i))

Supplementary restraint system warning lamp indicates a fault airbag light (7.1.6 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

all underside covered in black underseal preventing full inspection

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

all underside covered in black underseal preventing full inspection

Central Items removed from driver's view prior to test

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

unable to fully assess rear sills due to underseal being applied

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Central Items removed from driver's view prior to test

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp reflector slightly defective BOTH FRONT DISTORTED (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH PERISHED (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH PERISHED (5.3.4 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords ALL TYRES HEAVILY PERISHED (5.2.3 (d) (i))

Headlamp reflector slightly defective BOTH FRONT DISTORTED (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH PERISHED (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH PERISHED (5.3.4 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

surface corrosion underneath

surface corrosion every where

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

slight engine oil leak

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front brake juddering slightly (3.7.A.2b)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside front brake juddering slightly (3.7.A.2b)