2006 Fiat Ducato

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Body panel corroded and likely to cause injury front x member (6.2.1 (a) (i))

Brake lever has insufficient reserve travel hand brake (1.1.2 (a))

Fluid leak harmful to the environment or a risk to other road users diesel leak off engine (8.4.1 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel rear leaf spring hanger (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush located on front suspension (5.3.4 (a) (i))

Parking brake lever defective but can be satisfactorily operated travel on handbrake (1.1.6 (d))

engine oil on minimum

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall marked with yellow chalk (5.2.3 (d) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush located on front suspension (5.3.4 (a) (i))

Parking brake lever defective but can be satisfactorily operated travel on handbrake (1.1.6 (d))

engine oil on minimum

front inner arches slight corrosion

rear chassis to tow bar mounting corrosion

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle (3.7.B.5b)

front inner arches slight corrosion

rear chassis to tow bar mounting corrosion

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake load sensing valve linkage seized (3.6.E.3)

Nail in nearside front tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)