2007 Mazda 3

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

brake servo corroded

rear subframe corroded

Central Rear Seat belt buckle missing stalk (7.1.2 (d))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Stop lamp(s) emits other than a steady red light white (4.3.3 (a) (ii))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

brake servo corroded

rear subframe corroded

Nearside Rear Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone rear bushes (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn wishbone front bush (5.3.4 (a) (i))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone rear bushes (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources and insecure (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources and insecure (4.7.1 (b) (i))

Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit offside rear , size is 195/65/R15 91H (4.1.E.1)

offside rear sill slightly damaged

both side wiper blade has poor performance

nearside rear shock absorber has poor demping efect

nearside rear tyra has low tread depth , size is 195/65/R15(91H)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Anti-roll bar linkage insecure (2.4.G.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)