2008 Ford S-max

Front Suspension rod pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake warning device malfunctioning or defective (1.1.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened Front and rear (1.1.14 (a) (ii))

Brake pad(s) wearing thin Front and rear (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Rear Coil spring corroded Both sides (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

centre brake light not working

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

centre brake light not working

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge Both sides on limit (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Front Items removed from driver's view prior to test ()

Front Items removed from driver's view prior to test ()

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front wiper blades need renewing

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp aim too high (1.8)