2003 Mazda Premacy

Offside Rear brake disc corroded

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

n/s/f brake disc corroded on inner surface

o/s/r brake binding slightly

o/s/r brake disc corroded

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure has slight corrosion (6.1.A.1)

front exhaust bracket not attatched - but exhaust is still secure

Offside Rear Brake pipe slightly damaged (3.6.B.2c)

corrosion on o/s/r chassis

o/s/f brake starting to bind slightly

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Battery insecure (1.9.1)

Brake fluid warning lamp illuminated (3.6.G.2)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Front-centre and rear exhaust flanges very heavily corroded

Nail in nearside front tyre

Nail in nearside rear tyre

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

o/s inner sill corroded

o/s/r chassis corroded within 30cm of a perscribed area but not considered excessive

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside front brake binding (3.7.B.1)

Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

heavy surface corrosion on rear underside