MOT Status
ExpiredMileage
167,305 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Suspension arm pin or bush excessively worn both sides collers rotted (5.3.4 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Towbar with an unsafe modification to secondary components all supporting bolts corroded (6.1.6 (g) (i))
Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle deformed but serviceable (5.1.1 (a))
Rear Suspension component mounting prescribed area is corroded but not considered excessive spring hangers (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive trail arm perscribed areas (5.3.6 (a) (i))
Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened advice n/s/r top spring cup corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Coil spring mounting corroded and seriously weakened top spring cup corroded o/s/r (5.3.1 (b) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened advice n/s/r top spring cup corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside sharp edges on clips due to trim missing
Offside clips sharp edges due to trim missing
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (4.1.3 (b))
Emissions unable to be completed (8.2.2.2 (e))
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition half exhaust system missing (8.1.1 (a))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Central Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Play in steering rack inner joint(s) both ()
Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Play in steering rack inner joint(s) both ()
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Play in steering rack inner joint(s) ()
Offside Rear Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Play in steering rack inner joint(s) ()
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Central Rear Stop lamp not working (1.2.1b)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front position lamp(s) not working n/s front (1.1.A.3b)
Hazard warning switch faulty (1.4.B.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front chassis/jacking point corroded (6.1.B.2)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front chassis jacking point corroded (6.1.B.2)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Towbar component slightly corroded (6.6.1)
Nearside front brake binding (3.7.B.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Towbar component slightly corroded (6.6.1)
slight play at both front wheels
Brake load sensing valve inoperative (3.6.E.3)
slight play at both front wheels
Play in steering rack inner joint(s)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Play in steering rack inner joint(s)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
rear brake application uneven (3.7.B.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YH03 WUB is a 2003 Vauxhall Vivaro in White with a 1,870cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 58.1%.
Across all 2003 Vauxhall Vivaro models, the average MOT pass rate is 64.3% with a typical mileage of 113,068 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying YH03 WUB, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 23 years old, this Vauxhall Vivaro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YH03 WUB?
You can check the full history of YH03 WUB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YH03 WUB registered?
YH03 WUB is a 2003 Vauxhall Vivaro, first registered on 15 April 2003.
Is YH03 WUB safe to buy?
The MOT history for YH03 WUB shows 31 tests with a 58.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YH03 WUB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YH03 WUB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.