2006 Toyota Aygo

Brake pipe corroded, covered in grease or other material rear sections of both front to rear steel brake pipes at flexi hoses covered in grease (1.1.11 (c))

Front Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement mounting bushes of offside and nearside linkages splitting (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Inner sill panels offside and nearside along full length of vehicle corroded

Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill panels offside and nearside corroded in rear axle mounting prescribed areas (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing offside and nearside tyres perished and cracked in tread areas (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material rear sections of both front to rear steel brake pipes at flexi hoses corroded (1.1.11 (c))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear mounting bush split around mounting bolt boss in bush (5.3.4 (a) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arches offside and nearside in rear axle mounting prescribed areas corroded (5.3.6 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

offside and nearside inner and outer sills corroded along full length of vehicle

Coil spring corroded all (5.3.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust rattle

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Indicator switch inoperative (4.4.2 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Coil spring corroded all (5.3.1 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust rattle

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear outer sills (5.3.6 (a) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Tyre worn close to legal limit/worn on edge Both rear (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear (5.3.6 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge Both rear (5.2.3 (e))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

x 2 front headlamps are misty

Oil leak, but not excessive (8.4.1 (a) (i))

both headlamps only just have pattern

offside front tyre worn on inner edge

Brake pipe slightly corroded both front to rear (3.6.B.2c)

both headlamps only just have pattern

slight exhaust blow

Front position lamp(s) not working both (1.1.A.3b)

Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Suspension arm rubber bush deteriorated resulting in excessive movement both sides front arm rear bush (2.4.G.2)

Brake pipe slightly corroded both front to rear (3.6.B.2c)

slight exhaust blow

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)