2008 Jaguar X-type

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Coil spring corroded (5.3.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Offside Front Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction SAT NAV (3.1 (a) (ii))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL TO FLOOR (6.2.2 (d) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear SUBFRAME CORRODED

Coil spring corroded both rears (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened and lower suspension arms (5.3.3 (b) (i))

no reverse lights

plastic outer sill covers fitted

Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Coil spring corroded both rears (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened and lower suspension arms (5.3.3 (b) (i))

no reverse lights

plastic outer sill covers fitted

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn Trailing arm bush (5.1.2 (b) (i))

Nearside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn Trailing arm bush (5.1.2 (b) (i))

Offside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

reverse lights not working

Brake pedal has insufficient reserve travel (1.1.2 (a))

reverse lights not working

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

advise osf slight binding

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

front brakes discs slight wear inner