MOT Status
ValidMileage
172,923 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe corroded, covered in grease or other material both outter (1.1.11 (c))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Upper Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner (6.1.1 (d) (i))
Front Brake pipe corroded, covered in grease or other material both outter (1.1.11 (c))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake drum significantly and obviously worn (1.1.14 (a) (i))
Offside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Mechanical components corroded
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear light unit cracked
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases exhaust corroded centre to rear joint (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear light unit cracked
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases exhaust corroded centre to rear joint (6.1.2 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))
Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))
Rear suspension components corroded
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))
Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))
Rear suspension components corroded
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Registration plate lamp not working (1.1.C.1d)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear wiper split
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear wiper split
Driver's seat insecure (6.2.A.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YH10 XWM is a 2010 Mazda 6 in Blue with a 2,183cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 54.2%.
Across all 2010 Mazda 6 models, the average MOT pass rate is 76.5% with a typical mileage of 86,657 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YH10 XWM, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 16 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YH10 XWM?
You can check the full history of YH10 XWM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YH10 XWM registered?
YH10 XWM is a 2010 Mazda 6, first registered on 22 April 2010.
Is YH10 XWM safe to buy?
The MOT history for YH10 XWM shows 24 tests with a 54.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YH10 XWM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YH10 XWM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.