2013 Qingqi Qm 125 GY-2B

Headlamp insecure (4.1.1 (c))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Front Footrest missing (6.2.12 (a))

Offside Rear Direction indicator missing (4.4.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Steering linkage locking device missing (2.1.3 (d))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Clutch lever bent (6.2.7 (b))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Tyre worn close to the legal limit 1mm (5.2.3 (e))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Tyre worn close to the legal limit 1mm (5.2.3 (e))

Front Headlamp aim too low (4.1.2 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Drive chain excessively tight (6.2.1d)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Front shock absorber seal failed and leaking oil (2.3.3)

Fuel pipe leaking (7.2.1a)

Nearside Rear Direction indicators not working (1.5.1c)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Central Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Central Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Handlebar deformed (2.1.1b)

Front Roller brake test indicates a severely juddering brake (3.3.A1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Drive chain excessively loose (6.2.1d)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Nearside Front Clutch lever shortened. (6.2.1g)

Offside Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Headlamp aim too low (1.6)

Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)