2002 Mazda 6

Nearside Headlamp aim too high (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Seat belt anchorage prescribed area is excessively corroded WHEEL ARCH (5.2.6)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside front brake binding (3.7.B.1)

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nearside Outer Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nearside Outer Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Mechanical brake component has restricted free movement (3.5.1k)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

n/s/f top swivel dust boot split....stone chips on screen..front subframe corroded....all rear suspension components corroded..n/s/r wheel has one damaged wheel nut..metal brake pipes corroded..rear pads wearing thin..rear exhaust joint rusty

Front Steering column top bearing slightly worn (2.1.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Registration plate lamp not working (1.1.5c)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

n/s/front tyre outer sidewall cut and outer edge tread worn.

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake caliper has restricted free movement (3.5.1k)

Offside Rear brake disc excessively pitted (3.5.1h)