2004 Mazda 6

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Emissions not tested emmision test aborted due to blue smoke (8.2.1.2 (d))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Drive shaft joint excessively worn (6.1.7 (c) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill floor area (7.1.1 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill floor area (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion (6.1.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt x2 (2.2.C.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outersill (2.4.A.3)

Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt x2 (2.2.C.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working x2 (1.1.C.1d)

Body has slight corrosion all (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

front brake pads wearing thin

lower suspension arm boot deteriorating

rear suspension components corroding

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear number plate becoming illegable

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Front front brake juddering slightly (3.7.A.2b)

Offside Front front brake juddering slightly (3.7.A.2b)