2007 Smart Fortwo Passion 84 Auto

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' x 2 chips (8.3.1d)

Nearside Front Headlamp aim not tested (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Electrical wiring insecure abs wiring insecure and fouling anti roll bar on lock to lock (1.9.2a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear road wheel slight binding

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear rear brake fluctuating, but not excessively rear brakes and slight imbalance (3.7.B.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' x 2 chips (8.3.1d)

eml light on

Engine management light on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit 1.6mm and worn on inner edge (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit 1.6mm and has cuts in tread (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit 2mm and has cuts in tread (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

auxiliary drive belt perished

underbody covered

Emissions not tested lambda to high (7.3.A.1)

Fuel cap/sealing device sealing washer deteriorated (7.2.4c)

Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm and worn on inner edge (4.1.E.1)

Offside Headlamp aim too low possible broken headlight (1.8)

Engine management light on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit 1.6mm and worn on inner edge (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit 1.6mm and has cuts in tread (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit 2mm and has cuts in tread (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

auxiliary drive belt perished

underbody covered

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both fronts worn inner edge

engine management light on

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front coil spring broken (2.4.C.1a)

Horn not working (1.6.2a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Offside Rear Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)