2010 Jaguar Xf

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Electronic parking brake warning indicates a malfunction (1.1.6 (e))

Nearside Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt Track control arm (5.3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt Track control arm (5.3.4 (b) (ii))

Offside Rear Suspension arm ball joint has slight play Outer ball joint (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Headlamp lens slightly defective water ingress (4.1.1 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge rec replace (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement inner rec replace (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement inner rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement inner rear bush (5.3.4 (a) (i))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components