MOT Status
ExpiredMileage
68,290 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Direction indicator incorrect colour both (4.4.3 (a))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor and sills (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both rear bushes (5.3.4 (a) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced General corrosion of vehicle underside & components (6.1.1 (c) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement suspension sub-frame/axle assembly offside & nearside bonded rubber mounting bushes wearing (5.3.4 (a) (i))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced General corrosion of vehicle underside & components (6.1.1 (c) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement suspension sub-frame/axle assembly offside & nearside bonded rubber mounting bushes wearing (5.3.4 (a) (i))
Rear Brake hose has slight corrosion to ferrule offside and nearside (1.1.12 (f) (i))
Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened offside and nearside (1.1.14 (a) (ii))
Front Inner Brake pad(s) wearing thin offside and nearside (1.1.13 (a) (ii))
Rear Brake hose has slight corrosion to ferrule offside and nearside (1.1.12 (f) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch lower forward section & outer sill panel excessively corroded within 30cms of rear suspension mounting (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play suspension (5.3.4 (a) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Offside Rear Position lamp adversely affected by the operation of another lamp position lamp & stop lamp fault (4.2.3 (c))
Offside Stop lamp(s) not working inoperative when position lamp is on (4.3.1 (a) (ii))
Nearside Rear Valve stem seriously damaged valve stem excessively perished & splitting (5.2.3 (j)) DANGEROUS
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Brake hose slightly chafed (3.6.B.4d)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded floor section corroded within 30cms of front passenger seat belt & seat mountings (5.2.6)
Offside Front Outer Subframe mounting prescribed area is excessively corroded floor section corroded within 30cms of front suspension subframe mounting (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded floor section corroded within 30cms of drivers seat belt & seat mountings (5.2.6)
Offside Rear Brake hose slightly chafed (3.6.B.4d)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing (5.2.6)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Axle swivel joint has slight play (2.5.A.3b)
Centre Upper Stop lamp not working (1.2.1b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Axle swivel joint has slight play (2.5.A.3b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Axle swivel joint has slight play (2.5.A.3b)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nail in tyre
rear boot stop light inoperative.
How Reliable is the Ford Puma?
Based on 713,333 MOT tests across 56,808 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YJ02 EWA is a 2002 Ford Puma in Grey with a 1,679cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 70.4%.
Across all 2002 Ford Puma models, the average MOT pass rate is 71.0% with a typical mileage of 65,164 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Puma fails its MOT is brake pipe excessively corroded, accounting for 62,649 recorded failures. If you're considering buying YJ02 EWA, it's worth having these areas checked by a mechanic before committing.
The Ford Puma typically stays on UK roads for around 29 years. At 24 years old, this Ford Puma is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YJ02 EWA?
You can check the full history of YJ02 EWA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YJ02 EWA registered?
YJ02 EWA is a 2002 Ford Puma, first registered on 21 March 2002.
Is YJ02 EWA safe to buy?
The MOT history for YJ02 EWA shows 27 tests with a 70.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YJ02 EWA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YJ02 EWA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.