2003 MG Zr

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

General under body corrosion .

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Outer Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Outer Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))

Offside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective Broken. (6.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

General under body corrosion

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Rear Exhaust bracket broken

Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

side skirts covering sill both side

underbody ,steering and suspension components have surface rust

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Rear Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Headlamp aim too low (1.8)

Nearside Front front brake binding (3.7.B.1)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp aim too low (1.8)

Offside Front front brake binding (3.7.B.1)

Offside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

advise engine management light on.

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

advise engine management light on.

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

advise parking brake travel

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Offside Headlamp aim too low (1.8)

Offside Rear Registration plate lamp not working (1.1.5c)