2003 Perodua Kelisa

Fuel Pipe/s corroded ()

Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

Front wheel arch slightly corrosion

Nearside Front head light slightly damage

Nearside Front indicater slightly damage

Nearside Front wing slightly damage

Nearside Front wing slightly damage and rear light lightly damage

Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

Front wheel arch slightly corrosion

Fuel Pipe/s corroded ()

Nearside Front head light slightly damage

Nearside Front indicater slightly damage

Nearside Front wing slightly damage

Nearside Front wing slightly damage and rear light lightly damage

Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Emissions unable to be completed MAJOR LEAK OF EXHAUST GASSES (8.2.1.2 (d))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL X2 (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting X2 (6.2.2 (d) (i))

Rear Exhaust has a major leak of exhaust gases REAR PIPE CORRODED (6.1.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Fuel Pipe/s corroded ()

Offside Outer SILL CORRODED

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

FRONT TYRES WORN ON INNER EDGES

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREA (7.1.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

FRONT TYRES WORN ON INNER EDGES

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill area (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)