2003 Hyundai Getz

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

innerand outer rear wheel arches corroded

rear sills corroded and weak

underbody and suspension corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

corrosion to underbody and suspension

Offside Sub-frame mounting modified but not seriously weakened mounting bolt washer corroded through (5.3.3 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

rear axle corroded

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underbody , suspension and subframes corroded

Oil leak, but not excessive (8.4.1 (a) (i))

both headlight lens dull

brake pipes corroded

underbody,suspension and subgframes corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

both headlight lens dull

brake pipes corroded

underbody,suspension and subgframes corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both front droplinks worn

both front wishbone bushes perished

both headlight lens dull

brake pipes corroded

unable to properly assess welded repair due to underseal

underbody,suspension and subframes corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/inner wheel arch (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both front droplinks worn

both front wishbone bushes perished

both headlight lens dull

brake pipes corroded

underbody,suspension and subframes corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

n/s and o/s front drop link ball joint gaiters split

N/S/F tyre worn on edges

O/S/R tyre cracking on sidewall

Offside Rear Tyre has minor cracks in tread/sidewalls

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

brake pipes have surface corrosion

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

advise exhaust front pipe

advise offside rear tyre tread cracking & perishing

advise radiator cap leaking

advise front & rear no plates

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Power steering component(s) leaking (2.3.3b)