2005 Fiat Ducato

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive step (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

front brake discs slightly lipped and worn

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

front brake discs slightly lipped and worn

front cross member corroded

rear brake discs slightly corrode on discs faces

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

front brake discs slightly lipped and worn

front cross member corroded

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

front brake discs slightly lipped and worn

front cross member corroded

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front cross member area corroded

Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm also wearing outer edge (5.2.3 (e))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point area (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

front brake discs slightly corroded and worn on inner discs faces

front cross member corroded

Front lower cross member corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside centre side marker not working

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive Sump rusty and just starting to leak (8.4.1 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front lower cross member corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside centre side marker not working

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive Sump rusty and just starting to leak (8.4.1 (a) (i))

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust system not adequately supported (7.1.1)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)