2008 Yamaha Yzf

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Chain guard missing sprocket cover missing ()

Rear brake lever slightly fouling lower fairing

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Drive chain slightly tight (6.1.7 (k) (i))

right hand fork seal damp

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

clutch lever shortened but still easily applied

nearside footpeg bent

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

clutch lever shortened but still easily applied

nearside footpeg bent

Brake lever is short but brake can still be readily applied (3.1.3c)

Fairings insecure but not likely to impede the steering (2.1.2e)

accident damage down the os of vehicle

wiring loose above front mudguard

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Brake lever is short but brake can still be readily applied (3.1.3c)

Fairings insecure but not likely to impede the steering (2.1.2e)

accident damage down the os of vehicle

wiring loose above front mudguard

Front Brake lever is short but brake can still be readily applied lever (3.1.3c)

Front Front shock absorber has light misting of stanchion both (2.3.3)

Nearside Front Fairings insecure but not likely to impede the steering (2.1.2e)

Front Brake lever is short but brake can still be readily applied lever (3.1.3c)

Front Front shock absorber has light misting of stanchion both (2.3.3)

Nearside Front Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Front Headlamp aim too high (1.6)

Fairing insecure and likely to impede the steering (2.1.2e)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Headlamp aim too high (1.6)

Offside Steering lock stop ineffective (2.1.3)

Rear Plate brake test indicates a binding brake (3.3.B1a)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Plate brake test indicates a slightly grabbing brake (3.3.B1b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Numberplate light not working.

Offside Front shock absorber has light misting of stanchion (2.3.3)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)