2011 Derbi Senda

Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a))

Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))

Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Throttle operating incorrectly (6.2.7 (a) (i))

Chain guard missing ()

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Position lamp not working (4.2.1 (a))

Headlamp aim too low (4.1.2 (a))

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Suspension damping effect slightly inadequate

Chain guard missing ()

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Chain guard missing ()

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

Direction indicators flashing less than 60 times a minute (1.5.1c)

Drive chain excessively loose (6.2.1d)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings are slightly rough (2.3.5b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings have slight free play (2.4.A.2c)

both front fork seals have light mist of oil

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))