2003 Triumph Speed Triple

Front brake fluid level checked - no inspection window. Pipe slightly kinked.

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement Rear suspension linkage bearings have slight up & down play (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Rear suspension linkage bearings have slight up & down play (5.3.4 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear suspension is very stiff

Exhaust noisy (8.1.1 (a))

Offside Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (7.1.2)

Rear Plate brake test indicates a sticking brake (3.3.B1a)

Exhaust noisy (7.1.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Headlamp aim too low (1.6)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Tyre worn close to the legal limit (4.1.3(ii))