2004 Fiat Ducato

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber silo (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber silo (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in several places (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber silo (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Headlamp aim projected beam image is obviously incorrect lens milky (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

front underside undersealed

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front chassis corroded outside prescribed area

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault air bag light (7.1.6 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake pipe slightly corroded front to rear, centre section (3.6.B.2c)

Exhaust has a minor leak of exhaust gases exhaust deteriorated (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened x2 (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded at rack (2.3.2)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Steering component mounting prescribed area is excessively corroded within 30cm of rear of sub frame mounting point (2.2.C.1h)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Steering component mounting prescribed area is excessively corroded within 30cm of rear of Sub frame mounting point (2.2.C.1h)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords cut in tread down to chords on outer edge (4.1.D.1a) DANGEROUS

Brake pipe excessively corroded front to rear (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front tyre cut but no cord visible

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front advise inner wings

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Offside Front Front wheel bearing has slight play slight noise (2.5.A.3c)

Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS

slight binding nearside front brake

slight binding offside front brake

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)