2004 Suzuki GS500

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Position lamp light intensity obviously reduced Only 1 bulb working. (4.2.3 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Exhaust noisy (8.1.1 (a))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Exhaust slightly loose (6.1.2 (a))

Central Rear Lower Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high (1.6)

Motorcycle structure excessively corroded front engine mount broke away from corrosion (6.1.1a)

Motorcycle structure excessively corroded lower front frame rails (6.1.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Motorcycle structure slightly corroded swingarm near shock (6.1.1a)

Rear suspension lightly rubbing not affecting the movement of the rear suspension exhaust rubbing swingarm slightly (2.4.A.3a)

Front Motorcycle structure slightly corroded (6.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

front engine mount broken

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Wheel alignment slightly misaligned. (2.5.1)

front engine mount broken

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp aim too low and too far to the right. (1.6)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Brake master cylinder has a seized master cylinder pivot. (3.2.B5) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS