2012 Nissan Navara

Brake pedal wearing smooth (1.1.2 (c))

Front Exhaust has a minor leak of exhaust gases minor leak from gasket near flexi section (6.1.2 (a))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Lower Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust silencer outer skin corroded

Front Brake disc significantly and obviously worn Both sides (1.1.14 (a) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring hanger mount (front of leaf spring) (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring hanger mount (rear of leaf spring) (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Chassis corroded around front suspension mountings.

Chassis corroded around rear spring hangers.

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Chassis corroded around front suspension mountings.

Chassis corroded around rear spring hangers.

Offside Front Corrosion on shock absorber.

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis cross over section near fuel tank support mount. (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring front mount point. (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases Flexi section. (6.1.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases centre box. (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Inner face (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin Inner Pads (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Engine cover and undertrays fitted.

Front rubber exhaust mounting missing.

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Slight leak from pinion seal of rear diff.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components