2002 Subaru Impreza

Front Integral body structure is corroded but structural rigidity is not significantly reduced o/s, n/s (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced o/s, n/s (6.1.1 (c) (i))

Emissions not tested (8.2.1.2 (d))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Integral body structure is corroded but structural rigidity is not significantly reduced o/s, n/s (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced o/s, n/s (6.1.1 (c) (i))

Front Registration plate missing (0.1 (a))

Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill/chassis (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill/chassis (5.3.6 (a) (i))

Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive body sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive body sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Play in steering rack inner joint(s)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Play in steering rack inner joint(s)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front brake discs corroded

front registration plate slightly damaged

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front brake discs corroded

front registration plate slightly damaged

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in nearside rear tyre

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in nearside rear tyre

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)