MOT Status
ExpiredMileage
89,414 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Bumper insecure (6.1.4 (a) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))
Nearside Rear Brake pipe leaking on a hydraulic braking system above fuel tank (1.1.11 (b) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Oil leak, but not excessive (8.4.1 (a) (i))
offside front caliper carrier bolt doesn't look fully tightened but carrier still secure
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Brake fluid significantly below minimum mark (1.1.10 (d) (ii))
Front Bumper insecure (6.1.4 (a) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
offside front caliper carrier bolt doesn't look fully tightened but carrier still secure
Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 2mm` (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both axle bushes deteriorating (5.1.2 (b) (i))
Top radiator pipe kinked [Chance of over heating]
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 2mm` (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both axle bushes deteriorating (5.1.2 (b) (i))
Top radiator pipe kinked [Chance of over heating]
Nearside Front Anti-lock braking system component excessively damaged abs ring (1.6 (e))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Power steering pump drive system defective power steering belt cracked (2.3.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Offside Registration plate lamp not working (1.1.5c)
How Reliable is the MG Zr?
Based on 651,705 MOT tests across 53,026 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YK03 ADF is a 2003 MG Zr in Blue with a 1,396cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2003 MG Zr models, the average MOT pass rate is 70.2% with a typical mileage of 57,033 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG Zr fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 31,258 recorded failures. If you're considering buying YK03 ADF, it's worth having these areas checked by a mechanic before committing.
The MG Zr typically stays on UK roads for around 25 years. At 23 years old, this MG Zr is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YK03 ADF?
You can check the full history of YK03 ADF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YK03 ADF registered?
YK03 ADF is a 2003 MG Zr, first registered on 24 July 2003.
Is YK03 ADF safe to buy?
The MOT history for YK03 ADF shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YK03 ADF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YK03 ADF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.