MOT Status
ExpiredMileage
107,175 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Stop lamp not working (1.2.1b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension arm which is adjustable, loose in adjustment threads (2.4.G.1)
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension arm which is adjustable, loose in adjustment threads (2.4.G.1)
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside front brake juddering severely (3.7.A.2b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YK03 VVU is a 2003 Mazda 6 in Yellow with a 1,999cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YK03 VVU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YK03 VVU?
You can check the full history of YK03 VVU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YK03 VVU registered?
YK03 VVU is a 2003 Mazda 6, first registered on 1 March 2003.
Is YK03 VVU safe to buy?
The MOT history for YK03 VVU shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YK03 VVU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YK03 VVU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.