2007 Toyota Corolla

Front Headlamp has a product on the light source but not seriously reducing light output N/S and O/S (4.1.4 (b))

Offside Rear Upper Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Headlamp has a product on the light source but not seriously reducing light output N/S and O/S (4.1.4 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Upper Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Coil spring corroded both fronts (5.3.1 (b) (i))

Nearside Rear Brake pad(s) wearing thin cant see clearly enough to assess advice brake check (1.1.13 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Coil spring corroded both rears (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced both rear inner sills (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

under body has slight corrosion

Front Coil spring corroded Nearside and offside (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Upper Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded Nearside and offside (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not excessive

Brake pipe corroded, covered in grease or other material rest of brake pipes are greased up obscuring condition (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension spring mounting prescribed area is corroded but not considered excessive both front spring cups are HEAVILY CORRODED (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Service brake binding but not excessively both rear wheels are binding slightly (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened rear beam HEAVILY CORRODED (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear inner sills to floor by axle component mountings are HEAVILY CORRODED (5.3.6 (a) (i))

Rear rear judder on hand brake application

under body floor to sills heavily corroded

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords DANGEROUS (5.2.3 (d) (i))

Brake pipe corroded, covered in grease or other material rest of brake pipes are greased up obscuring condition (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension spring mounting prescribed area is corroded but not considered excessive both front spring cups are HEAVILY CORRODED (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Service brake binding but not excessively both rear wheels are binding slightly (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened rear beam HEAVILY CORRODED (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear inner sills to floor by axle component mountings are HEAVILY CORRODED (5.3.6 (a) (i))

Rear rear judder on hand brake application

under body floor to sills heavily corroded

Brake pipe corroded, covered in grease or other material most brake pipes have been greased up obscuring the condition (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both spring cups are heavily corroded (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened rear beam axle is heavily corroded (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear load baring area by axle bushes/attachment is corroded (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive inner sill to floor both sides are corroded (5.3.6 (a) (i))

Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Lower Suspension arm fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material most brake pipes have been greased up obscuring the condition (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both spring cups are heavily corroded (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened rear beam axle is heavily corroded (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear load baring area by axle bushes/attachment is corroded (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive inner sill to floor both sides are corroded (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all greased up (1.1.11 (c))

Front Lower Suspension arm corroded but not seriously weakened both HEAVILY CORRODED (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing DANGEROUS CONDITION (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective beam image poor (4.1.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing cracking (5.2.3 (d) (ii))

Offside Rear tyre is old...2006 manufacture

under body corroded including suspension components

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front slight brake bind.

Nearside Play in steering rack inner joint(s)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear axle mounting bushes slightly deteriorated.

Slight play in nearside inner steering rack ball joint

Very slight brake bind on nearside front.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Rear axle mounting bushes slightly deteriorated.

Slight play in nearside inner steering rack ball joint

Very slight brake bind on nearside front.

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Centre Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)