2010 Mazda 6

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases "Y" section corroded (6.1.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front brake pipe

slight blow on the exhaust

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front brake pipe

slight blow on the exhaust

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)